DUCATI PAUL SMART BERON TURN SIGNALS INSTALLATION MANUAL
download WHEN MOUNTING OBERON TURN SIGNALS TO THE FRONT FAIRING LOCATION YOU WILL NEED TO REMOVE THE CLIP # 13 AS SHOWN IN THE DRAW- ING. DISCONNECT PIGTAIL CONNECTORS FROM TURN SIGNAL AND THEN REMOVE...
View ArticleYAMAHA V-STAR 650/ 1100 CLASSIC F ATS/ SLIMS MOUNTING KIT INSTALLATION...
download 1. Cover gas tank and front fender with towels to avoid damage during installation. 2. Install the two mounting plates onto the windshield, using the bottom and third bolt up. Leave the nylon...
View ArticleHARLEY DAVIDSON FXR BADLANDER CUSTOM SEAT INSTALLATION INSTRUCTIONS
download This kit is designed for installation on 1982 and later FXR model vehicles.installation 1 CAUTION When performing the following procedures, be cautious not to scratch painted surfaces (fender,...
View ArticleHARLEY DAVIDSON FLHR SEATS Installation Instructions
download Kits 52981-98A and 51102-01A fit 1997 and later FLHR and 1998 and later FLHRCI model motorcycles. Kits 52059-97A and 52918-98A are designed for installation on 1997 and later FLHR and 1997 and...
View ArticleHARLEY DAVIDSON DYNA GLIDE CUSTOM SEAT KIT Installation Instructions
download Installation When performing the following procedures, be careful not to scratch painted surfaces (fender, tank, etc.) with metal tabs on seat. 1. Remove existing seat from motorcycle. Keep...
View ArticleHARLEY DAVIDSON FXD SOLO SADDLE REMOVAL AND INSTALLATION MANUAL
download Removal of Stock Seat 1. Remove screw (6) to detach rear seat mounting bracket (9) from fender. 1996 models will have a nylon washer under the bracket that should also be saved for...
View ArticleHARLEY DAVIDSON AIR WING SADDLEBAG LID RAIL LIGHTS INSTALLATION MANUAL
download INSTALLATION 1. If saddlebag rails have not yet been installed: Perform the Air Wing Saddlebag Rail installation up to the point of final assembly of the rails to the saddlebag lids. If...
View ArticleHARLEY DAVIDSON SOFTAIL EXTENDED REACH CONTROLS KITS INSTALLATION MANUAL
download PREPARE THE MOTORCYCLE 1. For models equipped with saddlebags: Remove the saddlebags following the instructions in the appropriate Service Manual. 2. Remove the seat following the directions...
View ArticleHARLEY DAVIDSON DYNA VOLTAGE REGULATOR KIT INSTALLATION MANUAL
download INSTALLATION 1. Remove and discard the original voltage regulator mounting screws. 2. See Figure 1. Place a chrome washer (4) onto each of the button head screws (5) from the kit. Insert the...
View ArticleHARLEY DAVIDSON BADLANDER SEAT KIT INSTALLATION MANUAL
download Installation When performing the following procedures, be careful not to scratch painted surfaces (fender, tank, etc.) with metal tabs on seat. 1. Remove existing seat strap from motorcycle....
View Article
More Pages to Explore .....